產品特點（Features）：
可以配置氣動馬達直徑從2”到12”，壓比1:1—65:1規格，流量：2.8—56.8 LPM。
(It can configure the pneumatic motor of which the diameter is from 2" to 12",pressure ratio: 1:1-65:1,Flow:2.8-56.8 LPM.)

產品優點(Advantages)：
可以輸送從低粘度到高粘度液體，安裝標準壓盤適用于流體流量要求較小的5Gallon、55Gallon標準桶流體輸送，或無需壓盤直接插桶使用。
(It can transport liquids from low viscosity to high viscosity.It applies to fluids that stored with 5Gallon,55Gallon standard barrel and requires smaller flow after installing the standard pressure plate,also can use the barrel directly without pressure plate. )
產品種類（Products）：
油漆泵、油脂泵、膠水泵、油墨泵、漿料泵、航空煤油泵等多型號各種低、中、高粘度流體輸送。
(Paint pump, Oil pump, Glue pump, Ink pump, Size pump, Aviation kerosene pump and other pumps which enables to transport fluids of various viscosity.)

技術參數(Specifications)：
粘度范圍(Viscosity range) 100cps~1,000,000 cps
進氣壓力(Inlet pressure) 0-10.3 bar
出口壓力(Outlet pressure) 0-290.7 bar
每次循環排量(Each cycle displacement) 0.206 L
每分鐘大循環次數(Maximum cycle index) 60 times/min
每分鐘大流量(Maximum flow) 12.3 L/Min

查看全部介紹