LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300oC N/mm2 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10oC/ minute ramp from 25 to 400
oC
@ 340oC, % 0.2
@ 400oC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300oC
Volume Resistivity, ohm-cm ≤0.01
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
漢高樂泰導電膠,晉中電子材料漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
寧河燒結銀納米銀導電膠ssp2020參數,納米銀
面議
產品名：燒結銀納米銀導電膠ssp2020,燒結銀,納米銀,代替焊片 金錫焊片
永川電子材料漢高ABLESTIKJM7000導電膠,樂泰導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
平谷燒結銀納米銀導電膠ssp2020培訓
面議
產品名：燒結銀納米銀導電膠ssp2020,燒結銀,納米銀,代替焊片 金錫焊片
中山厚膜電路漢高ABLESTIKJM7000導電膠,樂泰導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
懷柔燒結銀納米銀導電膠ssp2020電話,燒結銀
面議
產品名：燒結銀納米銀導電膠ssp2020,燒結銀,納米銀,代替焊片 金錫焊片